Dustin
- Total activity 178
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 166
Activity overview
Latest activity by Dustin-
Dustin created an article,
Why won't my BenjiLock open even though the Blue LEDs appear around the Fingerprint Sensor?
If you try opening your lock with a Programmed fingerprint and the Blue LED's appear around the sensor, but nothing else happens it's is likely due to the battery being low. Plug the provided USB c...
-
Dustin created an article,
Master Reset your BenjiLock
Wake up your BenjiLock by touching the screen with a finger that is not programmed. Insert the key and turn counterclockwise Touch the screen with your original stored fingerprint (the master user...
-
Dustin created an article,
How do I know if all fingerprints have been deleted?
Press your finger against the fingerprint sensor, if the Blue LEDs around the sensor flash, the lock has no registered fingerprints.
-
Dustin created an article,
Seeing a Red Light appear when trying to open your BenjiLock?
If you see a Red LED Light appear when trying to open your BenjiLock with your fingerprint it usually means one of two things. 1. The battery is getting low and needs to be recharged. a) Conn...
-
Dustin created an article,
Full "BenjiLock Instructions"
Charge your Benjilock® By Hampton LOCK - Remove the included USB cable from the package. Connect the USB cable to the lock (bottom) and to a standard USB input. The RED LED on the top of your loc...
-
Dustin created an article,
Having trouble getting the Fingerprint Sensor to read your finger?
If you're having trouble getting the fingerprint sensor to read your finger: Try positioning your finger at a slightly different angle each of the 5 times you place it against the sensor. Put just...
-
Dustin created an article,
Downloadable PDF Full "BenjiLock Instructions"
Download the full instructions here.
-
Dustin created an article,
How do I know when my BenjiLock is fully charged?
After plugging the USB charging cable into the bottom of the lock, a Red LED light will display at the top of the lock indicating the BenjiLock is charging. When the Red LED light disappears the lo...
-
Dustin created an article,
Why does the Red light appear when I try to program a new fingerprint?
After the silver button is pressed during the programming process, the BenjiLock requires 5 successful attempts at registering your fingerprint, if the attempt was successful you will see a Blue LE...
-
Dustin created an article,
Can I program the same fingerprint under different users?
No. A single fingerprint can only be programmed once. The lock will not allow the same fingerprint to be added again unless the fingerprint has been deleted. For example, you can not add a fingerpr...