Additional Users/Fingerprints are second to the Master User and can only open the lock. To program Additional Users/Fingerprints, the Master User print will be needed to authenticate the programming and delete fingerprints.
PROGRAMMING NOTE: Each time you touch the sensor while programming your fingerprint, you should hear a short beep, and the Blue LED should flash, indicating a successful capture. If you are met with a Red LED at any time, that means the lock didn't capture it successfully, and you will need to do it again. Continue the process until your print is successfully captured the specified number of times.
Programming Additional Users/Fingerprints -
- Press and hold any finger against the fingerprint sensor for about 3 seconds; when the LED beings too flash Red and Blue, remove your finger.
- Authenticate the programming by touching the fingerprint sensor with the Master User print (the first fingerprint programmed).
- Using the finger you want to program, touch the fingerprint sensor 10 times, positioning your finger at a slightly different angle each time.