Setting the Auto-Lock Delay Timer

The “Auto-Lock Delay Timer” sets the Auto-Lock feature to wait the desired amount of time (from 10 to 99 seconds) before automatically locking.

NOTE: The “Auto-Lock Delay Timer” can ONLY be set between 10 to 99 seconds. 

WARNING: The “Auto-Lock” feature does not know if your door is in the open or closed position and will extend the deadbolt regardless of the door’s position.

1. Press the [SET] button for 1 second
   (You will hear a short audible beep to indicate the lock is in programming mode)
2. Enter the programming code followed by “#”
3. Enter the following code “70#”
4. Enter the desired amount of time you want the “Auto-lock Delay Timer” set for and then press “#”.

Example: If you want the Deadbolt to wait 15 seconds before automatically locking enter “15” if you want to set it to wait 30 seconds before automatically locking enter “30”
(You will hear an audible beep and the green LED will flash to indicate the delay time has been set.)