When “Auto-Lock” is ON the Deadbolt will lock automatically after the preferred delay time of between 10 to 99 seconds. (See setting “Auto-Lock Delay Timer” for instructions on how to set the preferred delay time) “Auto-Lock” is disabled by default.
NOTE: When “Auto-Lock” is enabled the green LED will blink until the preferred delay time is up and the lock activates.
WARNING: The “Auto-Lock” feature does not know if your door is in the open or closed position and will extend the deadbolt regardless of the door’s position.
- Press the [SET] button for 1 second.
(You will hear a short audible beep to indicate the lock is in programming mode) - Enter the programming code followed by “#”.
- Enter the following code “80#”
- Next, enter “1#” to turn Auto-lock ON -or- “0#” to turn the Auto-lock OFF
(By default, the Auto-Lock delay is set to 10 seconds)