The Master User is the first fingerprint programmed and is needed to add and/or delete Additional Users/Fingerprints. If the Master User has NOT been programmed or all stored fingerprints are deleted, ANY fingerprint can open the lock.
PROGRAMMING NOTE: Each time you touch the sensor while programming your fingerprint, you should hear a short beep, and the Blue LED should flash, indicating a successful capture. If you are met with a Red LED at any time, that means the lock didn't capture it successfully, and you will need to do it again. Continue the process until your print is successfully captured the specified number of times.
Programming the Master User -
- Press and hold any finger against the fingerprint sensor for about 3 seconds until you hear a short beep, and the Blue LED appears solid, then remove your finger.
- Using the finger you want to program, touch the sensor 10 times, positioning your finger at a slightly different angle each time.